Sandstone Pier Capping made to your specifications, fast and easy...

First Choose the Thickness...

Then Choose the Edge...

Check to if your's fall into our Regular or Large price categories. Pier Caps come with your chosen edge on all four sides.

Regular size Pier Caps: custom cut any size up to 450x450mm

Dressed all round diamond sawn slab	Sawn with pencil round.	Sawn with 45 degree bevel.	Rock faced (measurements to arris line).	Bull nosed.
50mm thick	53	93	83	113
75mm thick	79	139	124	169
100mm thick	103	186	166	226
200mm thick	206	372	332	n/a

Large Size Pier Caps: custom cut any size up to 650x650mm

Dressed all round diamond sawn slab	Sawn with pencil round.	Sawn with 45 degree bevel.	Rock faced (measurements to arris line).	Bull nosed.
50mm thick	128	183	169	210
75mm thick	191	274	253	315
100mm thick	254	366	338	421
200mm thick	520	732	677	n/a

Rock faced is the most popular edge because of its durability.
20mm is a good benchmark for capping overhang.
Rock facing protrudes past the arris line about half the thickness of the stone..... (50mm stone equals roughly 25mm rock face).
Bull nosed also generally protrudes half the thickness of the stone but width measurements have always been calculated to the pinnacle of the nose.
Sawn edges are always supplied with a slight round (about a pencil) to remove the sharpness.
A rule of thumb is that if your wall is up to hip hight then 50mm is right. From hip to shoulder then you might start looking at 75mm and if its over your head then consider 100mm.
Any questions at all just give us a call.